Mechanical and Spectro-Radiometrical Properties of the Recycled Agricultural Plastic Films
Mehaničke i optičke karakteristike recikliranih plastičnih materijala dobijenih iz poljoprivrede
Pregled/ Otvaranje
Autor
Picuno, Pietro
Sica, Carmela
Mungnozza Scarascia, Giacomo
Dimitrijevic, Aleksandra
Ključne reči
agricultural plastic filmsmechanical recycling
new film properties
plastična folija
mehanička reciklaža
novi plastični materijali
Metadata
Prikaz svih podataka o dokumentuApstrakt
Intensive use of plastic in horticulture around Europe is causing the
creation of the large amount of plastic waste that need to be dealt with. One possible way
to control the amount of this waste is its proper management and recycling. In this paper
the results of a survey investigating the possibilities to producing new regenerated films
through mechanical recycling, from post-consume agricultural plastic films are analyzed.
Four recycled films, different in composition, have been extruded and subsequently
characterized by mechanical tests and spectro-radiometric analysis. Tensile tests were
done in order to define the maximum strength and percentage elongation at break of
these new materials while spectro-radiometric analysis allowed the definition of the
optical properties, specifically with regard to the transmittance of radiation in the PAR
and long IR radiation. The results allow the definition of the main engineering properties
of these materials, and the possibilities for further investigation in order to have new
products as an economic efficient and environmentally friendly alternative. Savremena i intenzivna poljoprivredna proizvodnja u kontrolisanim i
delimično kontrolisanim uslovima ima za posledicu velike količine plastičnog otpada
koji predstavlja ekološki i ekonomski balast poljoprivrednoj proizvodnji. Jedan od
načina da se kontroliše količina plastičnog otpada je njegova reciklaža. U radu su dati
rezultati ispitivanja četiri tipa recikliranih folija nastalih od folija korišćenih za
plastenike, niske tunele i mulčiranje zemljišta kao i od plastike od plastičnih bočica
korišćenih u poljoprivredi. Nakon ekstrudiranja reciklirane folije su analizirane sa
aspekta mehaničkih i spektro-radiometrijskih osobina. Dobijeni rezultati se mogu
iskoristiti za definisanje osnovnih inžinjerskih karakteristika novodobijenih materijala i
mogu ukazati na mogućnosti njihovog daljeg korišćenja.